TP702
TENGYU
310ml 600ml
Black
| Quantity: | |
|---|---|
TP702 Polyurethane Sealant for windshield is one component,moisture-curing,non-sag,fast cure polyurethane sealant for windshield.
| Tack free time | 30-90min |
| Curing speed | 3-5mm/24h |
| Solid content | ≥95% |
| Extrudability | ≥80g/min |
| Hardness | 60 Shore A |
| Density | 1.3g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40°C~80°C |
●A high-performance,flexible,joint-filling one component polyurethane window glass sealant that reacts with moisture to form a permanent elastomer
●One-component structure
●Low volatility
●Excellent construction characteristics
●Fast curing
●Anti-aging and weathering
●The same applies to manual operations and large packaging
●Suitable for the installation of automotive windshields
●Suitable materials:glass,metal,metal primer and lacquer,ceramic materials and plastics
9months stored dry below 25°C unopened inoriginal containers
Note
●After cleaning the surface,wipe it dry and continue to glue evenly.
●Please use it promptly after opening.
●-5°C to 38°C environment,not recommended to apply.
●Before the surface is dry,it can be trimmed with tools.
●After the bench mark,it can be sprayed on the surface.Before spraying,please carry out compatibility test;the paint needs to be used after it is fully cured.
●Wash hands and exposed skin immediately after application.
TP702 Polyurethane Sealant for windshield is one component,moisture-curing,non-sag,fast cure polyurethane sealant for windshield.
| Tack free time | 30-90min |
| Curing speed | 3-5mm/24h |
| Solid content | ≥95% |
| Extrudability | ≥80g/min |
| Hardness | 60 Shore A |
| Density | 1.3g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40°C~80°C |
●A high-performance,flexible,joint-filling one component polyurethane window glass sealant that reacts with moisture to form a permanent elastomer
●One-component structure
●Low volatility
●Excellent construction characteristics
●Fast curing
●Anti-aging and weathering
●The same applies to manual operations and large packaging
●Suitable for the installation of automotive windshields
●Suitable materials:glass,metal,metal primer and lacquer,ceramic materials and plastics
9months stored dry below 25°C unopened inoriginal containers
Note
●After cleaning the surface,wipe it dry and continue to glue evenly.
●Please use it promptly after opening.
●-5°C to 38°C environment,not recommended to apply.
●Before the surface is dry,it can be trimmed with tools.
●After the bench mark,it can be sprayed on the surface.Before spraying,please carry out compatibility test;the paint needs to be used after it is fully cured.
●Wash hands and exposed skin immediately after application.
