TP702
TENGYU
310ml 600ml
Black
| Quantity: | |
|---|---|
| Tack free time | 30-90min |
| Curing speed | 3-5mm/24h |
| Solid content | ≥95% |
| Extrudability | ≥80g/min |
| Hardness | 60 Shore A |
| Density | 1.3g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40°C~80°C |
● A high-performance,flexible,joint-filling one component polyurethane window glass sealant that reacts with moisture to form a permanent elastomer
● One-component structure
● Low volatility
● Excellent construction characteristics
● Fast curing
● Anti-aging and weathering
● The same applies to manual operations and large packaging
●Suitable for the installation of automotive windshields.
●Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
The car windguard sealant can be stored for 9 months dry below 25°C unopened inoriginal containers
● After cleaning the surface,wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5°C to 38°C environment,not recommended to apply.
● Before the surface is dry,it can be trimmed with tools.
● After the bench mark,it can be sprayed on the surface. Before spraying,please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
| Tack free time | 30-90min |
| Curing speed | 3-5mm/24h |
| Solid content | ≥95% |
| Extrudability | ≥80g/min |
| Hardness | 60 Shore A |
| Density | 1.3g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40°C~80°C |
● A high-performance,flexible,joint-filling one component polyurethane window glass sealant that reacts with moisture to form a permanent elastomer
● One-component structure
● Low volatility
● Excellent construction characteristics
● Fast curing
● Anti-aging and weathering
● The same applies to manual operations and large packaging
●Suitable for the installation of automotive windshields.
●Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
The car windguard sealant can be stored for 9 months dry below 25°C unopened inoriginal containers
● After cleaning the surface,wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5°C to 38°C environment,not recommended to apply.
● Before the surface is dry,it can be trimmed with tools.
● After the bench mark,it can be sprayed on the surface. Before spraying,please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
