TM511
TENGYU
280ml 300ml 600ml
White,Black,Grey,Customized Colors
| Quantity: | |
|---|---|
Elasticity MS Polymer is a one-component moisture-curing adhesive,based on the development of a new generation ofsilane-terminated polymer (MS polymer). After curing, theglue exhibits high strength, high elasticity and high shearstrength. Suitable for high-strength elastic bondingfunctional applications.
| Appearance | Paste |
| Density | 1.51±0.02g/cm³ |
| Shrinkage rate | ≤2% |
| Skin time | 5~20min |
| Curing time | ≥2.5mm/24h |
| Elongation at break | ≥400% |
| tensile strength | ≥4.0MPa |
| 100% Tensile Strength | ≥1.8MPa |
| 180° peel strength | ≥4.0 N/mm |
| Hardness Shore A | 50~60 |
| Pear Strength | ≥3.0 N/mm |
| Shrinkage rate after curing | ≤1.5% |
| Peel Strength | ≥5.0 N/mm |
● Neutral curing, does not corrode the substrate.
● No formaldehyde, no solvent, no smell.
● High strength and elasticity, impact resistance, fatigueresistance, and can directly bond objects.
● Temperature resistance range: -40°C~90°C, long-term usewill not age.
Elasticity MS Polymer is mainly used for pasting and fixing various large-areacomponents and various plates, and can continuouslymaintain high-strength bonding to materials such asstainless steel, aluminum alloy, plastic, glass, ceramic tile,wood etc.
Note
● The glued part must be dry, tidy, strong and not loose,free of floating sand, and the wood must not have oilseepage.
● Adhesive glue must have enough bonding area to ensurethat the bonding strength meets the requirements, andpress hard to make the glue as thin as possible whenpasting.
● After the glue is applied, the glue should be pastedbefore the surface of the glue is skinned. Note that theskinning time will be shortened at high temperatures.Please stick it as soon as possible after applying the glue.
● Applying glue on the oily surface or waxed surface mayaffect the adhesion. Please clean the bonding surfaceand apply the glue.
● The elasticity ms polymer can be stored for 9 months in dry and cool environment.
● The recommended storage temperature is 10℃~25℃ and it is not exceeding 45℃）
● Keep contents out of reach of children.In case of contact with eyes,please rinse eyes with plently of water and seek medical advice as soon as possible.
Elasticity MS Polymer is a one-component moisture-curing adhesive,based on the development of a new generation ofsilane-terminated polymer (MS polymer). After curing, theglue exhibits high strength, high elasticity and high shearstrength. Suitable for high-strength elastic bondingfunctional applications.
| Appearance | Paste |
| Density | 1.51±0.02g/cm³ |
| Shrinkage rate | ≤2% |
| Skin time | 5~20min |
| Curing time | ≥2.5mm/24h |
| Elongation at break | ≥400% |
| tensile strength | ≥4.0MPa |
| 100% Tensile Strength | ≥1.8MPa |
| 180° peel strength | ≥4.0 N/mm |
| Hardness Shore A | 50~60 |
| Pear Strength | ≥3.0 N/mm |
| Shrinkage rate after curing | ≤1.5% |
| Peel Strength | ≥5.0 N/mm |
● Neutral curing, does not corrode the substrate.
● No formaldehyde, no solvent, no smell.
● High strength and elasticity, impact resistance, fatigueresistance, and can directly bond objects.
● Temperature resistance range: -40°C~90°C, long-term usewill not age.
Elasticity MS Polymer is mainly used for pasting and fixing various large-areacomponents and various plates, and can continuouslymaintain high-strength bonding to materials such asstainless steel, aluminum alloy, plastic, glass, ceramic tile,wood etc.
Note
● The glued part must be dry, tidy, strong and not loose,free of floating sand, and the wood must not have oilseepage.
● Adhesive glue must have enough bonding area to ensurethat the bonding strength meets the requirements, andpress hard to make the glue as thin as possible whenpasting.
● After the glue is applied, the glue should be pastedbefore the surface of the glue is skinned. Note that theskinning time will be shortened at high temperatures.Please stick it as soon as possible after applying the glue.
● Applying glue on the oily surface or waxed surface mayaffect the adhesion. Please clean the bonding surfaceand apply the glue.
● The elasticity ms polymer can be stored for 9 months in dry and cool environment.
● The recommended storage temperature is 10℃~25℃ and it is not exceeding 45℃）
● Keep contents out of reach of children.In case of contact with eyes,please rinse eyes with plently of water and seek medical advice as soon as possible.
