TA113
Tengyu
| Quantity: | |
|---|---|
Appearance | Paste |
Density | 1.4±0.1g/cm³ |
Solid content | ≥72% |
Odor | Low |
Shelf life | 18moths |
Application Temperature | -5C-40°C |
Drying Time | 24hours |
1. Easy-to-use, latex-based formula
2. Water clean-up & low odor
3. Can be sanded, planed, cut, drilled, screwed & nailed
4. Will not crack or shrink
5. Stainable & paintable
6. Interior/Exterior use
1. All surfaces need to be clean and dry with no loose or powdery material.
2. For best results when applying to exterior surfaces, prime surfaces first.
3. Press filler firmly into place with a filling knife.
4. For deeper cavities apply in layers up to 8mm thick, allowing each layer to dry before reapplying next layer.
5. Fast dry - nail holes in 15 minutes. Large holes 3 hours. Allow to dry before sanding and painting.
6. Drying time will be extended in humid or cold conditions. Do not apply below 5℃.
7. Can be over painted with both acrylic and turpentine based paint systems.
8. Clean up in water
wood gouges
wood holes
wood gracks
wood furniture
Store the product in its original, tightly sealed packaging at temperatures between 0°C and 30°C. It is sensitive to frost, so avoid exposure to freezing conditions. When stored in a cool, dry place, the shelf life is approximately 18 months.
Keep out of reach of children. In case of eye contact, rinse immediately with plenty of clean water and seek medical attention if necessary.
Appearance | Paste |
Density | 1.4±0.1g/cm³ |
Solid content | ≥72% |
Odor | Low |
Shelf life | 18moths |
Application Temperature | -5C-40°C |
Drying Time | 24hours |
1. Easy-to-use, latex-based formula
2. Water clean-up & low odor
3. Can be sanded, planed, cut, drilled, screwed & nailed
4. Will not crack or shrink
5. Stainable & paintable
6. Interior/Exterior use
1. All surfaces need to be clean and dry with no loose or powdery material.
2. For best results when applying to exterior surfaces, prime surfaces first.
3. Press filler firmly into place with a filling knife.
4. For deeper cavities apply in layers up to 8mm thick, allowing each layer to dry before reapplying next layer.
5. Fast dry - nail holes in 15 minutes. Large holes 3 hours. Allow to dry before sanding and painting.
6. Drying time will be extended in humid or cold conditions. Do not apply below 5℃.
7. Can be over painted with both acrylic and turpentine based paint systems.
8. Clean up in water
wood gouges
wood holes
wood gracks
wood furniture
Store the product in its original, tightly sealed packaging at temperatures between 0°C and 30°C. It is sensitive to frost, so avoid exposure to freezing conditions. When stored in a cool, dry place, the shelf life is approximately 18 months.
Keep out of reach of children. In case of eye contact, rinse immediately with plenty of clean water and seek medical attention if necessary.
