TPS422
TENGYU
A component:190L/drum;B component:19L/bucket
| Quantity: | |
|---|---|
IG Polysulfide Sealant curies into an elastomer with high strength, high elasticity and low vapor permeability and excellent adhesion property to glass, aluminum and other accessories. IG Polysulfide Sealant is a designed two-component, room temperature vulcanization elastomeric sealant specially engineered for insulating glass industry. Its medium extrudability suits well for automatic or manual production lines.
| Appearance | Smooth paste, Part A white, Part B Black |
| Mixing ratio A : B by weight | 10~12:1 |
| Density (g/cm3) | Part A: 1.81 |
| Part B: 1.52 | |
| Sag | Vertical: 0 |
| Horizonal: no | |
| Tack free time (23℃) h | 1.5 |
| Tooling time (min) | 47 |
| Hardness (Shore A) | 35 |
| Elasticity Recovery Rate % | 81 |
| Tensile bonding strength MPa | 0.66 |
| Elongation at break % | 59 |
| Thermal weight loss % | 3.3 |
●Low moisture transmittance
●Excellent primerless adhesion to various substrates
●Ageing resistance
●Easy to use
●Excellent water oil and chemical resistance
●Especially formulated for manufacturing high quality insulating glass unit.
● Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible.
● It is stored in a cool and dry place 5℃ to 30℃ 6 months from the date of manufacture.
IG Polysulfide Sealant curies into an elastomer with high strength, high elasticity and low vapor permeability and excellent adhesion property to glass, aluminum and other accessories. IG Polysulfide Sealant is a designed two-component, room temperature vulcanization elastomeric sealant specially engineered for insulating glass industry. Its medium extrudability suits well for automatic or manual production lines.
| Appearance | Smooth paste, Part A white, Part B Black |
| Mixing ratio A : B by weight | 10~12:1 |
| Density (g/cm3) | Part A: 1.81 |
| Part B: 1.52 | |
| Sag | Vertical: 0 |
| Horizonal: no | |
| Tack free time (23℃) h | 1.5 |
| Tooling time (min) | 47 |
| Hardness (Shore A) | 35 |
| Elasticity Recovery Rate % | 81 |
| Tensile bonding strength MPa | 0.66 |
| Elongation at break % | 59 |
| Thermal weight loss % | 3.3 |
●Low moisture transmittance
●Excellent primerless adhesion to various substrates
●Ageing resistance
●Easy to use
●Excellent water oil and chemical resistance
●Especially formulated for manufacturing high quality insulating glass unit.
● Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible.
● It is stored in a cool and dry place 5℃ to 30℃ 6 months from the date of manufacture.
