How To Apply Tengyu Brand Epoxy Anchoring Ahdesive with Gun

The first step: take out a piece of rubber, rotate the screw cap and pull out the sleeve of the mouth of the rubber bottle.

 Step 2: Take out a static mixing tube and place it over the muzzle of the reinforced glue (long tube). 

Step 3: Take out the glue gun, and pull the glue gun to the full open position, pull the back. 

Step 4: Put the static mixing tube of the planting glue into the planting glue gun and check whether it is installed in place.

 Step 5: Pick up the planting glue gun, put the injection port of the static mixing tube into the drilled hole and slowly inject appropriate amount of planting glue. 

Method of drilling construction:

 The first step: Use electric or connected electric drilling machine to drill the required holes in the building to be strengthened. 

Step 2: Use a borehole cleaning brush to clean the dust in the drilled hole, which can be treated with a hair dryer. Step

 3: Pick up the planting glue gun, put the injection port of the static mixing tube into the drilled hole and slowly inject appropriate amount of planting glue. 

Step 4: The rebar that needs to be implanted is inserted in a rotary way into the drill hole that has been injected with the planting glue (rotary insertion). 

Step 5: After finishing the injection of planting rubber and the implantation of fructus plasters, you only need to wait for curing, and no operation is required during this period. 

The above is the role of epoxy planting rubber and underwater planting rubber and the operation and use of the method, if you also need other types of building reinforcement materials, you can find through the www.sealant-cn.com