TP703
TENGYU
310ml 600ml
White,Black,Grey etc.
| Quantity: | |
|---|---|
Car Body Metal Polyurethane Sealant is a single-component PU sealant.Car Body Metal Polyurethane Sealant can be widely used in car body metal bonding. After curing,Car Body Metal Polyurethane Sealant provides a permanently elastic bond to fasten materials with the frame work of car.Car Body Metal Polyurethane Sealant is water-proof age-resistance,solf and good bonding performance.
| Appearance | Paste |
| Specific gravity | 1.3KG/L |
| Sagging | <3mm |
| Skinning time | Wet solidification |
| Surface dry time | <60mins |
| Curing rate | 3mm/24h |
| Hardness,Shore A | 40 |
| Tensile Strength | 2.0Mpa |
| Elongation at break | >400% |
| Tear Strength | 11N/mm |
| Service Temperature Range | -40°C±80°C |
| Application in short time(at most 8 hours) | 120°C |
| Correction factor | 10% of the width of the joints |
●Neutral,no pollution and curing under normal temperature.
●Excellent durability.
●High abrasion resistance and tear strength.
●Good weathering and water resistance.
●Good slump resistance,non-sag.
●Apply directly on site,no need mix.
●Can be painted,good compatibility with paints.
●No corrosion.
●Seal for weld joint of auto and machines.
●Seal for joints of containers and shelters.
●Seal and waterproofing for joints of van vehicles.
●Seal for bus air-condition during installing.
●As an adhesive for metal plate of the autos.
12 months stored dry below 25°C unopened inoriginal containers
Note
Keep contents out of reach of children.In case of contact with eyes,please rinse eyes with plenty of water and seek medical advice as soon as possible
Car Body Metal Polyurethane Sealant is a single-component PU sealant.Car Body Metal Polyurethane Sealant can be widely used in car body metal bonding. After curing,Car Body Metal Polyurethane Sealant provides a permanently elastic bond to fasten materials with the frame work of car.Car Body Metal Polyurethane Sealant is water-proof age-resistance,solf and good bonding performance.
| Appearance | Paste |
| Specific gravity | 1.3KG/L |
| Sagging | <3mm |
| Skinning time | Wet solidification |
| Surface dry time | <60mins |
| Curing rate | 3mm/24h |
| Hardness,Shore A | 40 |
| Tensile Strength | 2.0Mpa |
| Elongation at break | >400% |
| Tear Strength | 11N/mm |
| Service Temperature Range | -40°C±80°C |
| Application in short time(at most 8 hours) | 120°C |
| Correction factor | 10% of the width of the joints |
●Neutral,no pollution and curing under normal temperature.
●Excellent durability.
●High abrasion resistance and tear strength.
●Good weathering and water resistance.
●Good slump resistance,non-sag.
●Apply directly on site,no need mix.
●Can be painted,good compatibility with paints.
●No corrosion.
●Seal for weld joint of auto and machines.
●Seal for joints of containers and shelters.
●Seal and waterproofing for joints of van vehicles.
●Seal for bus air-condition during installing.
●As an adhesive for metal plate of the autos.
12 months stored dry below 25°C unopened inoriginal containers
Note
Keep contents out of reach of children.In case of contact with eyes,please rinse eyes with plenty of water and seek medical advice as soon as possible
