Do you know Acrylic emulsion is important for sealant and waterproof coating ?

 Acrylic emulsion is milky white or nearly transparent viscous liquid. Acrylic emulsion is a kind of emulsion which is copolymerized by pure acrylic monomer. 

  It is a kind of emulsion with small particle size, multi-purpose and outstanding performance. 

02 Features △ Excellent gloss and transparency △ Water resistance and weather resistance △ alkaline resistance and stain resistance △ Good adhesion △ non-toxic, non-irritating, harmless to the human body, low pollution, in line with environmental requirements. 

03 Application △ Suitable for a variety of coating formulations, mainly used for building waterproof, casetin adhesive, water-based ink, plywood adhesive and so on. High gloss and semi-gloss coatings - masonry, wood and steel surfaces - for the preparation of flat, semi-gloss and high-gloss latex paints, as well as for the preparation of high quality finishing coatings for floors, cement tiles and tennis courts.

04 Classification emulsion according to the use of the product classification can be divided into: inner wall emulsion, outer wall emulsion, real stone paint emulsion, elastic emulsion, liquid granite paint emulsion, waterproof emulsion, sealing emulsion, etc. 

According to the composition of the product can be divided into: pure acrylic emulsion, silicone acrylic emulsion, styrene acrylic emulsion, vinegar acrylic emulsion and so on. Synthetic resin emulsion: is the base material of the coating, is one of the main film forming substances of the emulsion coating, and plays the role of adhesive in the coating. Acrylate emulsion coating according to polymer composition: styrene-acrylate copolymer emulsion, acrylate - tertiary vinyl carbonate copolymer emulsion, silicone - acrylate copolymer emulsion, all acrylate copolymer emulsion. According to the film characteristics: thermoplastic emulsion. Thermosetting emulsion, elastic emulsion, etc. 

According to the particle charge properties: anionic emulsion, cationic emulsion, non-ionic emulsion. Divided by use: internal emulsion, external emulsion, special emulsion. 

⒉ Pigment and filler: It is one of the main film forming substances of emulsion coating. Additives: pigment wetting dispersant, ph regulator, defoamer, rheological modifier, thickening agent, bactericidal preservative, film forming agent, anti-mildew and anti-algae agent, antifreeze agent, thixotropic agent, ultraviolet absorber, etc. Water: In industrial production, emulsion polymers should use distilled water or deionized water, sodium chloride content is below 0.05mg/L, and the conductivity value of water is controlled below 10mS.